TL;DR: Smart Handheld POS Terminal Board
AndroidSBC release: twelve-configuration handheld financial POS board family opens for volume export orders serving international market, United States. The WF-POSH-04 handheld financial POS Android motherboard covers the face recognition payment handheld POS build and eleven sister configurations in the WF-POSH series, spanning the RK3576 quad-core ARM Cortex-A72 2.2GHz plus quad-core ARM Cortex-A53 1.8GHz SoC with the ARM Mali-G52 MC3 GPU, 6-inch 1080x1920 MIPI DSI plus 3.5-inch customer screen, and Android 14 with AOSP baseline and optional GMS firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-POSH family from the Longgang source factory in Shenzhen to international market and United States importers who build handheld payment terminals, mobile checkout devices, delivery collection units, warehouse scanners and field service handhelds.

WF-POSH-04 Technical Specifications
| Parameter | AndroidSBC WF-POSH-04 (face recognition payment handheld POS build) |
|---|---|
| Processor | RK3576 quad-core ARM Cortex-A72 2.2GHz plus quad-core ARM Cortex-A53 1.8GHz SoC |
| Process node | 8nm |
| GPU | Mali-G52 MC3 |
| Memory | 4GB LPDDR4X |
| Storage | 64GB eMMC plus TF card up to 256GB |
| Display and touch | 6-inch 1080x1920 MIPI DSI plus 3.5-inch customer screen with 10-point capacitive touch with glove and wet-finger support |
| Payment and capture | 3D structured light face module plus NFC contactless and IC card reader |
| Printer and peripherals | 80mm thermal printer header with 120mm per second output |
| Wireless and positioning | 4G LTE Cat 6 modem plus dual-band WiFi 6 and Bluetooth 5.2 |
| Interfaces | 1 USB Type-C host and OTG, 1 USB host, 1 RS232, 1 MIPI CSI, 6 GPIO, 1 SIM slot, 1 thermal printer header |
| Operating system | Android 14 with AOSP baseline and optional GMS |
| Power and reliability | 7.4V dual-cell battery management with 9V/2A fast charge, -10C to 55C operating ambient |
All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-POSH-04 (face recognition payment handheld POS build) holds the touch panel, the thermal printer and the scan engine together while running the 72-hour burn-in loop, a configuration that competing single-platform boards rarely document at the top of the temperature window. For United States importers sourcing the WF-POSH family, the WF-POSH-04-A variant is the typical configuration for the chain restaurant and pharmacy face payment use case, in a handheld terminal footprint with a sustained weekly capacity of 5000 pcs/wk.
Global Mobile Payment, Handheld POS and Cashless Checkout Market Trends
Two forces drive the United States mobile checkout cycle. The first is contactless penetration, which pushes the reader off the counter and into the hand. The second is the delivery economy, where the payment has to happen at the door rather than at a till.
- Entry checkout tier: WF-POSH-01 covers card, receipt and peripheral handling on a single 5.5-inch handheld, which is the configuration most small retail networks standardise on.
- Connected field tier: WF-POSH-02 carries the modem, printer and peripheral options that delivery, courier and field service fleets specify, with positioning available on the logistics configuration.
- Flagship chain tier: WF-POSH-07 adds the larger memory and storage bundle, the customer-facing screen option and the higher battery budget that chain formats require.
The twelve-configuration WF-POSH line exists because international market rollouts are not uniform. One operator will use four of the twelve, and the point is that all four share one peripheral contract.
WF-POSH-04 Application Scenarios
The WF-POSH-04 face recognition payment handheld POS build sits inside a twelve-configuration WF-POSH Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-POSH-04-A configuration is the typical build for the chain restaurant and pharmacy face payment use case, with printer current profile, scan engine mapping and staged OTA management bundled.
- Convenience and grocery checkout: the WF-POSH-06 turns a queue into a transaction at the shelf rather than at the till.
- Quick-service restaurants and milk tea counters: the WF-POSH-05 takes the order, prints the ticket and takes payment in one pass.
- Delivery and last-mile collection: the WF-POSH-09 pairs the LTE modem with the scan engine and the printer for proof of delivery at the door.
- Warehouse picking and stocktaking: the WF-POSH-09 runs a twelve-hour shift on one battery with a sunlight readable panel.
- Parking, tolling and traffic enforcement: the WF-POSH-09 prints a citation and takes contactless payment on the same device.
- Banking agents and field insurance: card, QR and electronic signature capture away from a branch network.
- Mobile ticketing and event entry: scan, print and take payment at a gate without fixed infrastructure.
- Pop-up markets and street vending: a merchant account on a device that fits in an apron pocket.
- Retrofit programmes in international market: the same board re-uses the installed printer mechanism and scan engine, so an estate can be refreshed device by device.
Partnership Models for international market Buyers
AndroidSBC does not force a track on United States partners. The three below are the ones that actually get used.
- Distribution track: the partner buys the WF-POSH board against a published price list, keeps its own stock, and AndroidSBC supplies the printer profile, the scan mapping and the compliance documents with each lot.
- Integration track: the partner takes the board plus firmware customisation, receipt and language localisation and peripheral validation support, with a joint qualification run at the Longgang factory.
- Private-label track: the WF-POSH board ships under the partner brand with customised boot logo, packaging, enclosure and documentation, on a fixed bill of materials held for the length of the agreement.
All three tracks give international market partners the same thing underneath: a factory-built board, a frozen bill of materials and a firmware window measured in years rather than months.
Does the handheld POS board family support a face recognition payment handheld POS build?
Answer: Yes. The face recognition payment handheld POS build is a stock configuration on the handheld POS board family from AndroidSBC. All twelve configurations are validated against the same Android build and the same peripheral contract before shipment to international market.
Which configurations are available in the WF-POSH family for United States buyers?
Answer: The WF-POSH family spans 2GB LPDDR4 with 16GB onboard eMMC up to 8GB LPDDR5 with 128GB eMMC, 5.5-inch to 8-inch MIPI DSI or LVDS panels, and 4G LTE or 5G modem options. For United States buyers the choice is driven by the acquirer specification and by whether the site needs a printer and a scan engine.
Can one handheld POS board drive a touch panel, a thermal printer and a scan engine at once?
Answer: Yes. The WF-POSH board drives the touch panel, the thermal printer and the 2D scan engine simultaneously, and the current budget for that combination is measured per lot rather than estimated.
What payment scheme certification support does AndroidSBC provide for United States?
Answer: AndroidSBC supplies the hardware side of the certification file: secure boot, trusted execution, hardware encryption, the tamper detection lines and the key handling documentation. PCI, EMV and local scheme approval for United States are completed on the assembled terminal.
What is the minimum order quantity and the sample lead time for United States?
Answer: The sample lead is 1-3 days and mass production runs 15-30 days. For United States the MOQ on a custom configuration is set by the display and modem variant rather than by the silicon, and AndroidSBC publishes the figure with the price list.
Is custom ROM, boot logo or pre-installed app development available?
Answer: Firmware customisation is a standard service: boot logo, boot animation, launcher, pre-installed applications, kiosk lockdown and language packs. GMS and EDLA for United States are handled per programme rather than assumed, and AndroidSBC states that up front.
How are firmware updates delivered to a United States device estate after deployment?
Answer: Firmware is versioned per lot and delivered by staged OTA. The international market partner receives the build number, the OTA manifest and the rollback image, and updates can be reversed without opening the enclosure.
What shipping terms does AndroidSBC support for United States orders?
Answer: AndroidSBC books the Port of Los Angeles lane against a production slot, so the international market partner gets a sailing date with the order confirmation rather than after the goods are built.
Contact AndroidSBC: Start Your WF-POSH-04 Sourcing Conversation
For the handheld POS board family, AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels to international market integrators:
- Email: Androidsbc@163.com
- Export service hotline: +8613261677119
- Website: https://www.androidsbc.com
- Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
A 1-3 day sample lead applies to international market and United States buyers, with a 15-30 day mass-production lead on bulk orders. AndroidSBC commits to a seven-year firmware update window on the WF-POSH family.