TL;DR: RK3588 High Reliability Embedded Board
WF-RK3588-R2 Technical Specifications
| Parameter | AndroidSBC WF-RK3588-R2 (Robotics and AGV AMR Controller) |
|---|---|
| Processor | Rockchip RK3588 octa-core 4x Cortex-A76 + 4x Cortex-A55 (8nm) + 6 TOPS NPU |
| Process node | 8nm |
| GPU / AI | Arm Mali-G610 MP4 + 6 TOPS NPU + ROS2 native support |
| Sensor fusion | 2x 4-lane MIPI CSI cameras plus mmWave radar and IMU over CAN FD |
| Real-time I/O | EtherCAT master plus CAN FD plus RS485 plus servo drive interface |
| Memory | 8GB / 16GB LPDDR4X |
| Storage | 64GB eMMC + M.2 NVMe for SLAM maps and ROS2 bags |
| Wired network | Dual Gigabit Ethernet + 5G / 4G module support for fleet dispatch |
| Expansion | PCIe 3.0 x4 for additional lidar or frame grabber cards |
| Thermal range | Industrial grade -40C to 85C, fanless passive cooling |
| OS support | Linux Ubuntu 22.04 with ROS2 Humble plus Debian 12 plus Android 12 / 13 |
| Functional safety | Hardware watchdog plus RTC plus auto power-on after failure |
All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-RK3588-R2 (Robotics and AGV AMR Controller) holds its display output and its decoder load at the same time through the burn-in loop, a combination that the legacy boards in the comparison column cannot sustain. For United States importers sourcing the WF-Series, the 8GB + 64GB (WF-RK3588-R2-A) variant is the typical configuration for the robotics controller and AGV AMR compute use case, with a sustained weekly capacity of 5,000 pcs/wk on the Longgang line.
Global Robotics and Autonomous Mobile Robot Market Trends
- Service robot motherboard: WF-RK3588-R2 drives the 360-degree vision fusion plus the speech pipeline on the same NPU.
- Display and signage refresh cycles: a longer content loop and a higher panel resolution now define the refresh trigger. The WF-RK3588-R2 board carries that headroom without a board change.
- AMR autonomous mobile robot: WF-RK3588-R2 keeps a stable frame interval even when the SLAM map exceeds 100k landmarks.
Channel research on the Robotics and Autonomous Mobile Robot segment keeps landing on the same point: the constraint is allocation, and allocation is held by factories rather than traders.
Taken together, the three patterns explain why United States buyers are moving from single orders to twelve-month framework agreements with a monthly lot cadence, especially on edge AI and machine vision programmes that cannot absorb a supply gap.
WF-RK3588-R2 Application Scenarios
The WF-RK3588 line fits nine NPU application lanes, with the WF-RK3588-R2 (Robotics and AGV AMR Controller) as the lead SKU for Houston and United States programmes:
- Service robot motherboard: WF-RK3588-R2 drives the 360-degree vision fusion plus the speech pipeline on the same NPU.
- AGV control board: WF-RK3588-R2 holds the SLAM front-end while the EtherCAT master drives the wheel controllers.
- AMR autonomous mobile robot: WF-RK3588-R2 keeps a stable frame interval even when the SLAM map exceeds 100k landmarks.
- Quadruped robot: WF-RK3588-R2 runs the gait controller plus the perception stack on one octa-core cluster.
- Delivery robot: WF-RK3588-R2 holds the elevator interface plus the obstacle model on the same board.
- Cleaning robot: WF-RK3588-R2 fuses mmWave radar with the vision input to detect glass and dark obstacles.
- SLAM navigation: WF-RK3588-R2 ingests two MIPI CSI feeds plus the IMU at the full SLAM rate.
- ROS2 compute node: WF-RK3588-R2 runs the perception, planning, and control nodes on the same silicon with hardware isolation.
Partnership Models for Houston Buyers
AndroidSBC opens the WF-RK3588 to United States partners through three structures, and a single agreement can draw on more than one:
- OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom boot animation, custom SKU label, and a private-label certification file.
- ODM (your spec on our reference design): schematic and stack-up review, carrier or motherboard redesign, custom firmware features, and a BSP port handled by the Longgang engineering desk.
- Distribution (your channel, our stock): regional distributor rights, channel rebate, stock holding at the factory, and a framework agreement with a monthly lot release.
Does the WF-RK3588 line run Android or Linux, and what NPU framework stack is supported?
Answer: Yes on both. The WF-RK3588 line ships with Android 12 and Android 13 prebuilt, with Android 14 builds under validation. The Linux side covers Ubuntu 22.04 LTS, Debian 12, Yocto Kirkstone and Buildroot 2023.02, all of which load the Rockchip RKNN-Toolkit2 NPU runtime and the rknn-cross-compiler. That gives a United States integrator the freedom to run the certified Android TV and signage stack on one variant and a Linux NPU inference runtime on another variant from the same silicon, which is unusual for a single source factory.
What is the 6 TOPS triple-core NPU on the WF-RK3588 actually used for in production?
Answer: Three production-grade workloads. Retail analytics at 25fps on the WF-RK3588-E0, machine-vision defect classification on the WF-RK3588-V1, and 16-channel AI surveillance analytics on the WF-RK3588-N3. All three share the same silicon and the same certified firmware base, so United States integrators can re-deploy a board across workloads without re-validating the underlying silicon or the supply file.
Can AndroidSBC handle CE, FCC, UKCA, RoHS, REACH and IEC 62368-1 paperwork for United States?
Answer: That is handled in-house. Each lot leaves Longgang with a Declaration of Conformity and a Technical File holding the CE, FCC Part 15, UKCA, RoHS 2.0, REACH and IEC 62368-1 documents, all dated inside twelve months. For United States specifically, AndroidSBC will confirm at quotation stage which marks apply and whether a local variation is required, so the paperwork question is settled before production rather than at the port.
What are the MOQ and lead time for a first order on the WF-RK3588?
Answer: The entry point is 5,000 units per shipment, four weeks for samples and six weeks for production. A twelve-month framework agreement released monthly will bring the per-lot MOQ down, and AndroidSBC will accept a mixed order that draws several WF-RK3588 variants against a single contract.
Does AndroidSBC support custom Android ROM, custom Linux, or custom NPU model porting?
Answer: Yes, under NDA. ODM partners get custom Android ROM work including proprietary services and a custom launcher, Linux builds based on Ubuntu, Debian, Yocto or Buildroot, BSP ports for custom carrier boards, and NPU model porting through the Rockchip RKNN-Toolkit2 (quantization from PyTorch, ONNX, TensorFlow, Caffe and MXNet). The SDK and BSP source are released to the partner under the NDA, and AndroidSBC's engineering desk handles the port rather than handing over an unmodified vendor drop.
What about software updates and long-term support on the WF-RK3588?
Answer: Seven years minimum supply, with security patches maintained across the Android, Ubuntu LTS and Yocto firmware lines. Partners who deploy at scale can use the AndroidSBC OTA infrastructure to update field units and push new RKNN NPU model builds. For long-lifecycle programmes in machine vision, AI NVR, robotics or industrial control, the support term is written into the framework agreement at signature.
Can AndroidSBC ship to Amazon FBA warehouses or 3PL consolidation points?
Answer: Yes, including DDP into Amazon FBA in the US, EU and Japan, plus 3PL consolidation points in Hong Kong, Singapore, Rotterdam, Los Angeles and Shenzhen. Cartons are labelled to FBA inbound spec and the declaration names Longgang as the origin. Partners who consolidate in Hong Kong usually take FOB Yantian and handle the last leg themselves.
How does AndroidSBC handle RMA or DOA replacements on the WF-RK3588?
Answer: AndroidSBC targets a 0.3 percent DOA rate across the WF-RK3588 line, measured over the prior twelve months. On RMA, the partner returns the faulty WF-RK3588-R2 unit to Longgang with its burn-in barcode, and a replacement ships within ten business days. Because the burn-in record is attached per unit, the failure analysis normally comes back with a root cause rather than a credit note, which matters when a 16-channel AI NVR line is offline.
Contact AndroidSBC: Start Your WF-RK3588-R2 Sourcing Conversation
For Houston and United States importers, brand owners and distributors who want a direct factory relationship on the robotics and agv amr controller, the AndroidSBC export desk is reachable at:
- Email: Androidsbc@163.com
- Export service hotline: +8613261677119
- Website: https://www.androidsbc.com
- Destination market file: FCC Part 15 authorisation with an FCC ID for radio modules and a UL or ETL listing for United States, administered by FCC / UL, entering at Port of Los Angeles on the Los Angeles to Yantian lane
- Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
OEM and ODM enquiries move fastest when the first message carries three things: annual volume, certification scope and Incoterm. With those in hand the export desk returns a per-lot quote and the WF-RK3588 MOQ matrix inside two business days.
